Outdoor LoRa Data Logger
13
WARNING :
1.
It is strictly forbidden to have the battery positive and negative short circuit,
charging, discharging, heating over 100
℃
, remove, anatomy, or may cause
explosion, combustion, internal acid leakage.
2.
The Li-SOCL2 battery is an one-time battery. DO NOT re-charge, crush,
disassemble, the battery in any situation.
3.
Discharged battery is a hazardous waste, and
should be recycled or brought
to a hazardous waste disposal facility.
4.
Battery Replacement: You can purchase a new (full power) battery and
replace it by yourself. The Battery Specification and Power pin must be
compliant to the Original Design:
A.
4000mAh 3.6V Li-SOCL2 battery (ER18505, A Size) with power cable.
B.
Re-use the power connecter: Red pin for V+, and Black pin for GND.
C.
Follow the Battery Installation procedure mentioned above.
Step 3:
Cut off the extra cable tie, and plug the power cable onto
CON1
(Battery Power Socket).
