AMIC A9280-A-000 User Guide
AutoScan ON
The AutoScan ON function enables the user to let the CF reader automatically
perform Read Card UID function. Once enabled, the reader will perform Read
Card UID at 0.3 second interval. Each time the CF reader performs the Read Card
UID function, a red or green box should be displayed depends on the result of the
Read Card UID operation.
If the CF reader successfully reads a tag’s UID, a green box will be displayed at the
lower right hand corner and its UID will be displayed in the
Response Information
box. If the CF reader did not successfully read a tag’s UID, a red box will be
displayed at the lower right hand corner and
ErrCode=02
will be displayed in the
Response Information
box. A counter will be displayed in the counter box to
show the number of times the CF reader has performed the
Read Card UID
function.
When using AutoScan ON, the PDA can be moved around to read different tags
located at different places.
1. Single click on the
AutoScan On
button. Note: please single click on the
AutoScan On button only. Do not double click to prevent malfunction.
2. The CF reader will start reading tags at 0.3 second interval.
3. Hold the PDA containing the CF reader near the tag to be read.
4. RFID tag’s UID read by the reader should be displayed in the
Response
Information
box.
© AMIC Dec. 2004 – All rights reserved
p
14 of 20
Rev
1.0
