AMIC A9280-A-000 User Guide
Write Block Data
Each RFID tag has user accessible memory blocks. Typically each memory block
contains 4 bytes of data for tags complying with ISO-15693 standard. Please refer
to RFID tag manufacturer’s data sheet for details. AMIC’s A9280-A-000 CF reader
will write 4 bytes of data per block to RFID tags at a time. Please follow the steps
below for Read Block Data.
1. Single click on the
Block No.
box and input the desired memory block number
to be written by the reader (default value is 0). The range of the block number
available for user access depends on the tag itself. Please refer to RFID tag
manufacturer’s data sheet for details.
2. Single click on the
Block Data
box and input the desired data to be written on
to the tag.
3. Hold the PDA as close as possible to the tag.
4. Single click on
Write Data
button to write the specified tag’s memory block.
5. The
Operation OK / Fail Display
box on the lower right hand corner should
turn green.
6. The data written to the tag should be displayed in the
Response Information
box.
Figure – 9
© AMIC Dec. 2004 – All rights reserved
p
12 of 20
Rev
1.0
