Amibot glass AG31, Руководство пользователя

Страница: 19 / 125

17
Troubleshooting
EN
The robot freezes
at the edge of the
window.
1. There is a problem
with the edge
sensors.
2. The frames are less
than 5 mm thick.
1. Switch the robot off and
then place it back on the
window.
2. The robot has not
adapted to the frame of
the surface.
The bottom and top
indicator lights are
continuous RED and
BLUE.
There is a problem with
the robot's suction.
Put the robot back on the
window.
The robot beeps twice
while it is cleaning.
The edge sensors
detect a gap (edgeless
windows).
The robot is not suitable for
cleaning edgeless surfaces.
The robot makes a
grinding sound. The window or edge
sensors are too dirty.
1. Use a yellow cleaning
pad to clean the window.
2. Clean the edge detectors
and continuous tracks.
The robot is turned
on, its suction fan is
activated but the Start/
Pause button does not
work.
The safety tether is not
connected to the robot
correctly.
Check that the safety tether
is connected to the robot cor
-
rectly and that the connector
is locked in correctly.
The robot is plugged
in but the power cable
comes out easily. The power cable is
not connected to the
extension cord.
Connect the extension cord
to the power cable.