Amibot AG30, Инструкция по эксплуатации

Страница: 19 / 130

17
Troubleshooting
EN
Please contact AMIBOT technical department in the following cases:
• If the appliance has been dropped, damaged or come into contact
with water.
• If the power cord is damaged.
• If the back-up battery is defective.
Table: Malfunctions and possible causes
Malfunction Possible causes Solutions
The robot does not
move correctly, it skids
on the glazed surface.
1. The window is too
dirty or damp.
2. The cleaning pad is
too dirty or damp.
1. Dry the window.
2. Change the cleaning
pad .
3. Clean the continuous
tracks.
The robot stops and
the indicator flashes
RED.
The robot does not have
enough suction.
1. Check that the cleaning
pad is correctly
attached to the Velcro.
2. Check that the window
does not have any
faults.
3. The window frames
may be uneven,
however the robot can
be controlled using the
remote control.