amiad SAF-6000 Скачать руководство пользователя страница 27

 

SAF 6000 910101-000107 

                                      07.2019 

Page 27 of 28 

 

Amiad Limited Warranty

 

1.

 

This certificate applies to Amiad Water Systems Ltd. ("

Amiad

") products purchased by you (the "

Buyer

") from Amiad unless specifically 

agreed  otherwise  in  writing  by  Amiad.  This  Warranty  extends  only  to  the  original  purchaser,  and  is  not  transferable  to  anyone  who 
subsequently purchases, leases, or otherwise obtains the product from the original purchaser.  

2.

 

Amiad hereby warrants that the products are and will be free from defects in material and workmanship under normal use and service. 
Amiad warrants that it will correct manufacturing defects in the products, in accordance with the conditions set out in this Warranty. 

3.

 

This Warranty is enforceable for a period of 12 months after the date upon which the products were 

delivered (the “

Warranty Period

”). 

 

4.

 

In the event that during the Warranty Period the Buyer discovers a defect in material and/or workmanship in any product or part (the 

Defective Product

”), it shall submit a written complaint to 

Amiad using Amiad's standard Buyer Complaint Form. For the receipt of the 

Buyer Complaint Form, the submission of the complaint or any questions please contact your service representative.  

5.

 

Upon written  demand by Amiad the Buyer  shall return the Defective  Product - or a sample thereof  - to Amiad, at Amiad's cost. If the 
Buyer  ships  any  such  Defective  Product,  Amiad  suggests  the  Buyer  package  it  securely  and  insure  it  for  value,  as  Amiad  assumes  no 
liability for any loss or damage occurring during shipment. Provided however that in the event Amiad determines that this Warranty does 
not apply to such product, Buyer shall promptly reimburse Amiad for such cost (including freight and customs). Any returned product or 
part  must  be  accompanied  by  the  Warranty  certificate  and  the  purchase  invoice.  It  is  clarified  that  the  Buyer  may  not  return  the 
Defective Product unless such return was coordinated and approved by Amiad in advance.   

6.

 

Amiad's obligation under this Warranty shall be limited to, at Amiad's option, the  repair or exchange, free of charge, of the product or 
any part which may prove defective under normal use and service during the Warranty Period. The provision of a repair or replacement 
of  a  product  during  the  Warranty  Period  will  result  in  an  extension  of  the  Warranty  Period  by  an  additional  period  of  12  months, 
provided  that  the  total  accumulated  Warranty  Period  shall  in  any  event  be  no  more  than  18  months  from  the  date  upon  which  the 
products were delivered.  

7.

 

This  Warranty  is  valid  on  the  condition  that  the  products  are  installed  according  to  Amiad's  instructions  as  expressed  in  Amiad's 
instruction  manuals  and  according  to  the  technical  limitations  as  stipulated  in  Amiad's  literature  or  as  stated  by  a  representative  of 
Amiad.  

8.

 

This Warranty will not apply to damaged or defective products resulting from or related to:  

(i)

 

Fire, flood, power surges or failures or any other catastrophe and/or unforeseen occurrence, such as but not limited to those for which 
the Buyer is customarily insured for, or any force majeure events;  

(ii)

 

Fault, abuse or negligence of the Buyer;  

(iii)

 

Intake water not meeting the agreed standards, as set forth in a written document, approved by Amiad, or improper storage;  

(iv)

 

Improper or unauthorized use of the product or related parts by the Buyer, i

ncluding Buyer’s 

failure to operate the product in conformity 

with the recommendations and instructions of Amiad, as set forth in Amiad's manuals and other written materials, the operation of the 
product other than by a trained and qualified operator, or improper installation of the product by a third party not authorized by Amiad;  

(v)

 

Performance by the Buyer of maintenance or operation other than in conformity with the recommendations and instructions of Amiad, 
or other than in accordance with procedures defined in the literature supplied for products (including the timely replacement of requisite 
parts), and for services provided other than by a trained and qualified advanced operator; or 

(vi)

 

Any  alteration,  modification,  foreign  attachment  to  or  repair  of  the  products,  other  than  by  Amiad  or  its  authorized  technical 
representatives

ג

.  

9.

 

In no event shall Amiad  be liable to the Buyer or any third  party for any damages to property, or for any intangible or economic loss, 
including loss of profits, loss of customers or damage to reputation, for any damages, including indirect, special, consequential damages, 
or punitive damage arising out of or in connection with this Warranty, or arising out of or in connection with the product's performance 
or failure to perform, even if it has been advised of the possibility of such damages.  

10.

 

Amiad will be excused for failure to perform or for delay in performance hereunder if such failure or delay is due to causes beyond its 
reasonable control or force majeure preventing or hindering performance. 

11.

 

This Warranty set forth herein is the only contractual warranty given by Amiad and is provided in lieu of any other warranties created by 
any documentation, packaging or otherwise.  

12.

 

Amiad makes no warranty whatsoever in respect to accessories or parts not supplied by Amiad. In the event that Amiad is required to 
correct a Defective Product or product not covered by this Warranty, it will do so solely in consideration for additional fees. 

13.

 

The parties will actively endeavor to amicably settle any dispute arising between them. In the event that the parties are unable to reach 
an equitable settlement of such dispute, any claim or lawsuit related to the Warranty, its validity execution, its performance be brought 
before only the courts of Tel-Aviv, Israel. Israeli law will govern the Warranty, to the exclusion of any conflict of law rules.      

 

 
 
 

Содержание SAF-6000





























Отзывы: