amiad Filtomat MG-110P, Инструкции по установке, эксплуатации и обслуживанию

Страница: 15 / 51

MG110P
7.2013 Page 15 of 51
Maintenance
It is recommended to inspect the filter once a year, in the off season. Remove the filter as described above and inspect the screen and
O-rings, clean as necessary, and lubricate with silicone grease before reassembling.
In cases where clogging of the inlet screen occurs, experience with the local conditions will determine how often the screen should be
checked as a routine.
Preparing the Filter for Long-Term Shutdown or Freezing Conditions
1. Drain the filter.
2. Remove the filter screens as described previously and clean and dry them.
3. Disconnect the hydraulic lines to drain water out of them and reconnect.
4. Push the piston rod inward to remove water from the cylinder.
5. Reassemble.