amiad Filtomat MCFM 12000, Руководство пользователя, Страница: 11 / 28

6” MCFM - 12000 01.2021 Page 12 of 61
INSTALLATION
Installation instructions
1. Select a convenient location for the installation of the filter where operation and maintenance will be optimum. A
lifting auxiliary is recommended for installation.
2. Ensure that the distance between inlet and outlet flanges complies with the data sheet.
3. Ensure that the diameters and flange dimensions of the inlet and outlet pipes comply with the datasheet.
4. If possible, prior to installing the filter, flush the main line at the connection point thoroughly, to remove large
objects that may damage the filter's internal mechanism.
5. Prepare appropriate hardware to join the inlet and outlet flanges to the filter inlet and outlet flanges (bolts, nuts
and gaskets).
6. Install the filter horizontally. Please note that a minimum clearance as shown on the installation drawing is required
in order to allow disassembly of the unit.
7. Ensure the direction of flow according to the arrows marked on the filter housing.
8. The user should arrange suitable lighting at the area of the filter to enable good visibility and safemaintenance.
9. The user should arrange suitable platforms and safety barriers to enable easy access to the filter without climbing
on pipes and other equipment.
10. Ensure adequate size drain piping is available for connecting two BSP/NPT 2” drain valves for continuous flush and
super-flush.
Important notes on drain pipe configuration!!

Connect the drain piping system to allow free flow.

Depending on application, a minimum differential pressure between 0.2 bar and 0.6 bar should be maintained
between filter inlet and drain port. Installation of pump in the drain pipe should be considered, in case of back
pressure in drain system.