amiad DVF, Инструкции по установке, эксплуатации и обслуживанию, Страница: 6 / 42

910101-001048 12/2019 Page 6 of 42

While using lifting equipment, ensure that the filter or the lifted part is attached securely and in
a safe manner.

The product should be lifted from the integral lifting lugs ONLY when filter vessel is empty, using proper lifting
equipment according to local regulations.

Do not leave lifting equipment unsupervised. Avoid working below lifting equipment.

Wear a safety helmet while using lifting equipment.

Ensure that the flooring is sloped for drainage and to avoid accumulation of liquids.
2. Commissioning
•
Carefully read the commissioning and the first start-up operation instructions prior to operating the filter.
• Perform the startup and first operation procedures exactly as described in this manual to achieve maximum performance and
smooth operation of the filter.
•
Commissioning the filter should be performed by an authorized manufacturer’s technician only. Do not attempt to
commission the filter unaccompanied. This may lead to damage and may affect your warranty coverage.
3. Operation and Control

Do not
operate the filter before carefully reading and becoming familiar with its operation instructions.

Observe the safety stickers on the filter and do not perform any operation other than those given in this manual.

Do not operate or use the filter for purposes other than its original design and operational envelope.
4. Maintenance
Servicing the filter should be performed by an authorized manufacturer’s technician only.
Before any maintenance or non-regular operation carefully read the following:

Disconnect the filter from the power supply and lock the main power switch.

Disconnect any compressed air supply, release the residual pressure and lock the pneumatics main valve.

Disconnect the filter from the water system by closing and securing the manual inlet valve. In cases where the
downstream piping network is pressurized, close and secure the manual outlet valve.

Release the residual water pressure by opening the pressure release / drainage valve.

Maximum water temperature: 60
˚
C. The filter is not designed for hot water applications.

Place warning signs around the work area as required by local standards and procedures.

Inspect the filter’s safety stickers and replace any that are damaged or faded.
Mechanical

Use only appropriate standard tools when working on the filter.

Always open and close valves slowly and gradually.

Remove grease and oily material residues to avoid slipping.

Before disconnecting the filter from the water supply, electricity and pneumatics and before releasing the filter’s
residual pressure
DO NOT:
Loosen or unscrew bolts
Remove any protective cover
Open any service port flanges

Avoid splashing and water leakage to minimize slippage, electrification or damage to the equipment.