Doc No. 740123
11
MODEL 8 SERIES WELD HEAD
OPERATION MANUAL
7.0 ELECTRODE GEOMETRY & INSTALLATION
(cont’d.)
Use this chart to determine the electrode diameter.
Tube/Pipe
Wall thickness
Electrode
Diameter
0.020” – 0.035” (.50 – 1.0mm)
0.040” or 1/16” (1.0 or 1.6mm)
0.049” – 0.083” (1.2 – 2.1mm)
1/16” (1.6mm)
0.091” – 0.154” (2.3 – 3.9mm)
3/32” (2.3mm)
Fig. 10
Fig. 11
7.3 Using the “JOG” button on the power supply or remote operators
pendant, jog the rotor around until the electrode (or electrode
mounting hole) is in the 12 o’clock position. See fig. 12.
7.4 Lay the weld head on its side to prevent accidental dropping of the
electrode into the weld head. Loosen the electrode set screw.
Содержание M8 Series
Страница 1: ...OPERATION MANUAL M8 SERIES WELD HEADS ...
