Page 4 of 5
22166958
REV. A
11. Carefully rotate the ATX Power Supply back into position and secure with three screws previously
removed in step #3. Reconnect the ATX 20 pin, and 4-pin power connections to the B75B
motherboard. Reconnect the 4-pin power connection to the I/O board. See Figure 4.
12. Install the new 22350001 Hard Drive (Item #2) into the holder and connect the SATA power and the
SATA DATA cables to the B75B Motherboard as shown in Figure 4.
13. Reattach the covers and apply the new core computer part number label (Item #7) over the top of the
original core computer part number.
14. Reinstall the modified Computer Core into the jukebox. Reconnect all cables removed in step #2.
Take a moment to visually inspect the jukebox to ensure proper connections before powering up the
jukebox.
15. Attach the Windows 10 License (Item #6) label to the jukebox cabinet somewhere near, or over the
top of the original Windows license label.
Figure 4
SATA DATA
Cable
I/O Board power
connection
4 pin power
connection
Hard Drive power
connection
20 pin power
connection
Hard Drive
