AMI ATX-H310A, Руководство пользователя

Страница: 46 / 53

3-13
Chapter 3: BIOS setup
Mode [RS232]
Allows you to select the Serial Port mode. Configuration option: [RS232]
[*Active*] Serial Port 6
Use this device [Enabled]
Allows you to enable or disable this logical device. Configuration options:
[Enabled] [Disabled]
Possible [Use Automatic Settings]
This item appears only when you set Use this device to [Enabled] and
allows you to select an optimal setting for Super I/O devices. Configuration
options: [Use Automatic Settings] [IO=258h; IRQ=11; DMA] [IO=240h;
IRQ=11; DMA] [IO=248h; IRQ=3,4,5,6,7,11,12; DMA] [IO=250h;
IRQ=3,4,5,6,7,11,12; DMA] [IO=258h; IRQ=3,4,5,6,7,11,12; DMA]
3.3.6 PCH-FW Configuration
The items listed in this screen display firmware related information.
Firmware Update Configuration
Me FW Image Re-Flash [Disabled]
Allows you to enable or disable Me firmware Image Re-Flash function.
Configuration options: [Disabled] [Enabled]
Local FW Update [Enabled]
Allows you to enable or disable the Local FW Update function. Configuration
options: [Disabled] [Enabled]
3.3.7 Power Management
Power Mode [ATX Type]
Select power supply mode. Configuration options: [ATX Type] [AT Type]
The following items appear when you set Power Mode to [ATX Type].
Restore AC Power Loss [Last State]
[Last State] The system goes into either off or on state, whatever the system
state was.
[Always On] The system goes into on state after an AC power loss.
[Always Off] The system goes into off state after an AC power loss.