AMI ATX-H310A, Руководство пользователя

Страница: 27 / 53

2-19
Chapter 2: Motherboard information
2.7.2 Internal connectors
IMPORTANT:
• For a fully configured system, we recommend that you use a power supply
unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version)
and provides a minimum power of 330W.
• We recommend that you use a PSU with higher power output when
configuring a system with more power-consuming devices. The system
may become unstable or may not boot up if the power is inadequate.
1. ATX power connectors (24-pin EATX_PWR1, 8-pin EATX_PWR2)
These connectors are for ATX power supply plugs. The power supply plugs
are designed to fit these connectors in only one orientation. Find the proper
orientation and push down firmly until the connectors completely fit.
A
PIN 1
GND
+5 Volts
+5 Volts
+5 Volts
-5 Volts
GND
GND
GND
PSON#
GND
-12 Volts
+3 Volts
+3 Volts
+12 Volts
+12 Volts
+5V Standby
Power OK
GND
+5 Volts
GND
+5 Volts
GND
+3 Volts
+3 Volts
B
B A
EATX_PWR1
GND GND GND GND
+12V DC +12V DC +12V DC +12V DC
PIN 1
EATX_PWR2
PIN 1
SPI_1
GND
S_BIOS_CLK_1Q
S_BIOS_MOSI_1Q
(NC)
+3V_SPI
S_BIOS_CS0#_1Q
S_BIOS_MISO_1Q
(NC)
2. BIOS programmable header (8-pin SPI_1)
Use this header to flash the BIOS ROM.