AMGO A435-P, Инструкция по установке и обслуживанию

Страница: 13 / 47

11
2. Install the tire stop plate and connecting bolts : Tighten the platform and the cross
beam B with bolts. Tighten the tire stop plate , platform and cross beam A with bolt.
Note: Install the tire stop plate on the drive- in position . And the bolts for connecting with tire
stop plate is longer, pay attention when choosing the bolts.
(See Fig.17)
Instruction : 1
）
This lift is designed to be driven in at any position according to the space.
Below is the instruction for the drive -in position on cross beam B. If it is chosen to be driven
in from cross beam A, install the tire stop plate to the other side only.
2) Powerside column can be installed at any position accordingly. But the power unit must
always be installed adjacent to the safety lock release handle. Pay attention to direction
when installed the safety lock release handle, power unit and hydraulic system.
Fig.17
24
26
25
27
Drive- in direction
28
5
Cross beam B
Cross beam A
Interchange the column
installed position according
to demand
Tighten the platform
with bolts M16*30
Tighten the bolts
M16*35 with washer