AMG CANADIAN ELIPSE TH17, Руководство пользователя

Страница: 77 / 385

29
EN
Preliminary checks
Before switching on the machine, make sure that the pellet hopper is full, the combustion chamber
is clean, the glass door is closed, the power supply plug is connected and the switch on the back
is set to “1.”
TURNED OFF
The machine is off.
TURNED ON
The machine is in the first
ignition phase. The glow
plug and fume extractor are
active.
LOAD PELLET
In this phase of the ignition
process the machine starts
loading the pellets into
the brazier. The glow plug,
the fume extractor and the
cochlea engine are active.
FIRE PRESENT
In this phase of the ignition
process the machine starts
loading the pellets into the
brazier. The fume extractor
and the cochlea engine are
active.
BRAZIER CLEANING
The machine is cleaning
the basket. The smoke
extractor runs at maximum
speed and the pellet load is
at minimum.
WORK
The machine is working, in
this case at power 3. The
detected room temperature
is 21 ° C. During normal
work, the fumes fan, the
auger motor and the room
fan are active.
14 : 35
21°C P-2
TURNED ON
21 : 10
22°C P-1
TURNED OFF
14 : 35
22°C P-1
FIRE
present
14 : 35
21°C P-2
LOAD
pellet
Information on the display
15 : 18
22°C P-3
WORK
15 : 18
22°C p-2
BRAZIER
CLEANING
OK STAND BY
All the requests have been
satisfied and the machine is
ready for the “STAND BY”
mode.
HOLD REQUEST
The machine is in a “STAND
BY” mode as everything has
been satisfied and is waiting
for an heating request to
turn on.
WAIT COOLING
The machine has to
complete the cooling cicle
before turning on again.
21 : 10
22°C P-1
stand by
14 : 35
21°C P-2
HOLD
REQUEST
14 : 35
21°C P-2
WAIT
COOLING