AMG CANADIAN ELIPSE TH17, Руководство пользователя

Страница: 56 / 385

8
EN
In order to achieve the test report results, please load the performance parameters retained by
the manufacturer and the qualified technician. They will use these parameters once verified
that, during the installation, it is possibile to reproduce the laboratory conditions.
PARAMETER
UNIT OF MEASURE TH17
IDRO17 -DD-AU
XSAT170-DD-AU
REDONDAGLTH17-AU
Heat input
kW 18,03 17,6
Nominal heat output
kW 17,14 16,5
Reduced nominal heat output kW 4,00 5,4
CO concentration at nominal reference (13% O2) kW 13,70 15,0
CO concentration at reduced reference (13% O2)
kW 3,10 4,4
Nominal efficiency
mg/m 3 48,23 42
Reduced efficiency
mg/m 3 345,4 95
Flue gas rate (min-max) % 94,90 94,2
Draft advised (min-max) % 97,54 95,0
Flue gas temperature (min-max)
Kg/h 0,84 - 3,79 1,19 - 3,66
Tank capacity
mc 430 430
Recommended fuel g/s 3,02 - 11,04 5,5 - 10,3
Heated surface Pa 3 - 8 5 -10
Diameter flue outlet tube
°C 51,1 - 103 69 - 108
Diameter air intake
litri 31 31
Nominal voltage Bar 3 3
Nominal frequency Kg 33 33
Ignition power consumption
mm 80 80
Power consumption (min-max)
mm 50 50
Thermostove weight Inch 3/4 3/4
IEE V 230 230
Environmental decree n. 186 of 7/11/2017
Hz 50 50
N° Test Report
W 370 340
Powders at (13% O2) Ref. nominal heat input
Kg 160 160
Energy efficiency index 130 133
N° Test Report K 1969 2016 T1 K 2841 2020 T1
Environmental decree
n. 186 of 7/11/2017
Energy class A++ A++
Powders at (13% O2) Ref. nominal heat input
mg/m
3
15 12
It is recommended to control emissions after installation.
With obvious floor capacity evaluation, in the installation premises, a maximum can be deposited
of fuel, which corresponds to approx. 975kg of pellets.