AMG Systems Ltd. reserves the right to make changes to this
document without notice. The information herein is believed to
be accurate. No responsibility is assumed by AMG for its use.
Page 4 of 8
AMG5526 Instruction Sheet D17299-
00.doc
Connections
Optical Connections Singlemode
No. of Optical Connections .................. 1 per channel
Optical Fibre ........................................ Singlemode
Connector ............................................ SC/PC
Primary Optical Launch Power ............ -10dBm
Transmit Wavelength ........................... 1550nm
Primary Optical Sensitivity ................... -30dBm
Receive Wavelength ............................ 1310nm
Minimum Optical Dynamic Range ....... 20dB.
Power Connection
Connector Type ................................... Removable 2-pin, 3.81mm, Screw Terminal
Connector Partno. ................................ Phoenix 1803578
Supply Voltage ..................................... +12 to +15 Volts DC
Maximum Power .................................. 2.5 Watts
Data and Alarm Channel Connections
No. of Data Channels .......................... 1 per channel.
No. of Alarm Outputs ........................... 2 per channel.
Connectors .......................................... Removable 8-pin, 2.5mm, Screw Terminal
Connector Partno. ................................ Phoenix 1881383
Data Interfaces .................................... RS-232, RS-422 or R-S485. Selected by slide switch inside
enclosure. *See appropriate section on how to remove the case
for access to the data switches
RS-485 – Switch Position - Top
RS-422 – Switch Position - Middle
RS-232 – Switch Position - Bottom
Alarm Output ........................................ Solid-state Relay, maximum 150mA at 125Vac/dc, Ron < 6.5Ω