AMG Systems Ltd. reserves the right to make changes to this
document without notice. The information herein is believed to
be accurate. No responsibility is assumed by AMG for its use.
Page 3 of 8
AMG5814R-DF Instruction Sheet
D22166-00.doc
Introduction
Unit Functional Schematic
The
AMG5814R-DF
receives 1 video, 2
data channels and 8 bi-directional alarm
signals from the
AMG5813-DF
transmit
unit.
It also transmits 2 data channels and 8 bi-
directional alarm signals to the
AMG5813-
DF
.
Ethernet connectivity is also provided
between the two units.
Optical Connection
The
AMG5814R-DF
connections are illustrated in the following example which shows an
AMG5813R-
DF
transmit unit together with an
AMG5814R-DF
rackmount receive unit configured as a single
channel point to point system.
Ethernet Operation
The Ethernet interface supports 100Mbit/s full duplex operation only. Data is transmitted from one port
the other port with minimum delay or buffering.
The port implements "Auto MDI/MDIX" i.e. it may be connected with either a straight-though or cross-
over cable to an appropriate device such as external switch, PC or other DCE/DTE.
Two LED indicators are provided adjacent to the RJ-45 port: Green indicates Link / Data transfer and
Yellow indicates no Ethernet connection.