AMG-Sicherheitstechnik CT-Sensor, Инструкция по эксплуатации

Страница: 23 / 40

Page 23 of 35
APP SYMBOL IN PLAYSTORE
The central checks the incoming SMS for authorization.
Only stored SMS numbers can control the center via SMS. To switch, send an SMS,
with your PIN code that you use in the control panel and the surveillance area you
want to arm, to the telephone number of your headquarters' SIM card. The phone
number of the SIM card for your headquarters can be found in the documents of the
delivery.
EXAMPLE:
PIN code in the control panel is 12345, you want to arm the ground floor, then the SMS
reads:
12345erdgeschoss
Arming remotely via telephone call
You are on the way and want to arm the center remotely by means of a call.
This phone call feature is especially useful if you have no Internet connection on the
road or are still able to send an SMS (for example, when driving a car then call via
handsfree).
Please note that the control panel always changes the current switching status. If the
control panel is out of focus, it will be armed by the call function.
If the control panel is armed, it will be disarmed by the call function. For this reason,
please consider the call switching function as a reserve function if the switching is
neither possible via Internet nor via SMS and you know the current switching state
exactly.
In order to arm the control panel by means of a call, please use a mobile / smartphone
or landline telephone whose phone number is stored in the control center under
telephone numbers.
The central checks incoming calls for authorization.
Only stored telephone numbers can control the central office by means of a call.
To switch on, call the telephone number of the SIM card of your alarm center and let it
ring for about 5 seconds (2-3 rings). Then hang up. Then call the control panel again