Amfeltec Corp. PCI Express Cable Extender, Руководство по оборудованию

Страница: 14 / 18

Hardware Description
PCI Express Cable Extender, Hardware Manual, Revision 1.2
Page 10
6.4 Jumpers
Ref. Des. Type Usage
JP1 2 pin jumper Ground connection on the both pins
JP6,JP7,
JP8
3x3pin jumper
block
Define power source (+12V) for the UUT.
Position 2-3 (default): power from host computer
Position 1-2 : power from external power supply
Table 3: Jumpers
6.5 Connectors
Ref. Des. Type Usage
J6 3 pin header PCI Express Bus power. (+3.3V, GND, +12V)
J1
2.1 mm Power
Jack (+ internal)
External power supply connection. (+12V/4A DC)
J5
2x5 right angel
header 10 pin flat control cable for connection to the host
computer (x1 PCI express interface card)
J3 RJ45 connector
CAT6 data cable for connection to the host computer (x1
PCI express interface card)
J4
2x5 right angel
header
Connector for plug in external JTAG emulators or
AMFELTEC
Easy Loader™ for programming/loading
CPLD/FPGA on the UUT
U6
x1 PCI Express
connector
PCI express connector for plug in UUT
Table 4: Connectors