Amfeltec Corp. PCI Express Cable Extender, Руководство по оборудованию

Страница: 13 / 18

Hardware Description
PCI Express Cable Extender, Hardware Manual, Revision 1.2
Page 9
6.2 LEDs
Ref.
Des.
Silk screen
label
Type Usage
D9, D10 PRSNT Blue LEDs Indication Present UUT card.
D1, D4 FAIL Red LEDs Overload protection.
D2, D5 +3V Green LEDs
Indication power +3.3V and +12V on the
PCI express connector (on the UUT).
D3, D6 +12V Yellow LEDs
Indication incoming power +12V from
external power supply or from host
computer.
D7, D8 RST Red LEDs Indication PCI Express bus RESET signal.
Table 1: LEDs
6.3 Switches
Ref. Des. Type Usage
SW1 switch
Switch local PCI Express bus hot-swap controller
ON/OFF.
SW2
6 position control
switch block
Please look schematic and Appendix 2. The default
position setting: 1,2,3,4,5,6 – OFF
Table 2: Switches