AMF-BRUNS eFutureSafe, Руководство по эксплуатации

Страница: 32 / 40

Faults and Troubleshooting
Page 32 of 40 eFutureSafe
8 Faults and Troubleshooting
WARNING!
Risk of severe injury and material damage if repair work is
carried out incorrectly.
Therefore:

Only allow experienced technicians to carry out repair
work.
If faults occur when operating the eFutureSafe, proceed as
described in the following troubleshooting table. Contact
the customer service department if faults are encountered
which cannot be remedied using the information and
measures given in the table.
Fault Possible Cause Remedial Measures
The eFutureSafe can
not be swivelled to the
parking position.
There are obstacles in the
swivelling range of the eFu-
tureSafe.
Remove any obstacles.
The drive or the control system
is defective.
Unlatch the eFutureSafe using
the emergency unlatching fa-
cility (see Section 5.5,
page 27).
Do not continue to use the
eFutureSafe after this has
been done.
Initiate repairs.
The eFutureSafe can
not be swivelled to the
driving position.
There are bags or other objects
hanging from the backrest of
the wheelchair or within the
swivelling range of the eFu-
tureSafe.
Remove any obstacles.
The drive or the control system
is defective.
Do not continue to use the
eFutureSafe.
Initiate repairs.
The eFutureSafe
makes noises when
driving.
The eFutureSafe fastenings
have become loose.
Check tighten all fastening
bolts.
The height of the head-
and back-supports can
not be adjusted.
The guide or latch bushing is
dirty or defective.
Inspect the guide and latch
bushings. Clean or replace as
necessary.