Amewi KABOLITE 970, Руководство пользователя

Страница: 31 / 40

BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL KABOLITE 970
11
ENG
LISH
SWITCH ON TRANSMITTER
1. Make sure the battery is charged and the excavator is turned off.
2. Make sure that all toggle switches are in the neutral position
Press both power buttons simultaneously for a few seconds.
Wait until the display is on. Then you can let go of the power
buttons.
SWITCH ON EXCAVATOR
1. Open the battery compartment.
2. Make sure the power switch is off.
3. Place the battery in the battery compartment according to the
instructions (page 9) and connect the XT60 connector.
4. Turn on the model. The LEDs come on automatically and a beep
will sound. You can now close the door of the battery
compartment.
SWITCH OFF EXCAVATOR
1. Press the on / off button to turn off the model.
2. Press both power buttons on the transmitter to switch it off.
Before closing the battery compartment, make sure that the battery connector is disconnected from the socket. Even
when the excavator is switched off, minimal currents flow. If the battery is left idle for a longer period of time, this
can deeply discharge it and damage it beyond repair.
The receiver of the excavator and the transmitter are already connected to each other in the delivery state. It is therefore not
necessary to train the receiver on the transmitter. If the model does not react to the transmitter, switch both off and on again.