Amewi KABOLITE 970, Руководство пользователя

Страница: 29 / 40

BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL KABOLITE 970
9
ENG
LISH
BATTERY INSTALLATION
3S 11,1V 15000mAh Lithium-Ion-Battery (Included)
1. Open the battery compartment.
2. Push the battery into the compartment. Watch out
make sure the cables are on the right side (s. arrow).
3. Switch on the excavator using power switch.
4. Place all cables neatly in the compartment
and close the door.
The battery level indicator shows how full the battery is. Start the display using the display switch.
ATTENTION: If the battery capacity is below 25%, the battery must be charged. (see charging battery)
Display-Switch Battery remaining 25% Battery remaining 50% Battery remaining 75% Battery remaining 100%
CHARGE THE REMOTE-CONTROL BATTERY
The remote control is equipped with a built-in lithium battery 3.7V 4300mAh.
To charge the battery, pull off the dust cover on the charging socket
and connect the USB charging cable. Use to load one
Smartphone power adapter or a free one
USB socket on your PC or laptop.
AN-/AUS-SCHALTER
AKKUSTANDSANZEIGE
DC 5V CHARGING
PORT
WIRELESS LADEGERÄT (optional)
RX
The charging process is finished
when the battery indicator on
the display RX is green.