Amewi 26059, Руководство пользователя

Страница: 33 / 33

BEDIENUNGSANLEITUNG/MANUAL BINARY V2
33
IMPORTANT NOTICE:
1. Sail the model only in calm waters. Never sail in flowing waters. You could lose control and thus also the model.
2. Never try to swim to a stranded boat. Wait until the wind pushes the boat to shore.
3. Once you have finished sailing, remove the cover sticker to let the hull dry completely. Corrosion of the electronic components
may occur if you do not. If you drive the boat in salt water, then rinse it with clear water.
Wind
Wind abeam
Sails a position of 45°
Rudder: in center position.
Quarter LEE
Sails: Letting both out a little more
Rudder: to the left.
Starboard Tack-Running
Sails: Letting both out to
their maximum position
Rudder: in center position.
Port Tack-Running
Sails: Letting both out to
their maximum position
Rudder: in center position.
Quarter Lee
Sails: pulling both in a little
Rudder: in center position.
Luffing up
Sails: pulling in bit by bit
Rudder to the left
Start wind abeam
Sails: each at a position of 45°
Rudder: in center position.
Luffing up
Sails: pulling both in all way
Rudder: to the left
Port tack – close – hauled
Sails: keep pulling in
Rudder: to be held at the
center as long as the sails do
not shiver
Tacking
Sails: keep pulled in
Rudder: to the left.
Tacking
Sails: keeping pulled in
Rudder: to the right.
45°
Starboard tack – close – hauled
Sails: keeping pulled in
Rudder: to be held at the center as
long the sails do not shiver.
Tacking
Sails: keeping pulled in
Rudder: to the left.
Bearing away
Sails: let both out so as not
shiver
Rudder: to the left.
Port tack – close – hauled
Sails: keeping pulled in
Rudder: to be held at the center as long
as the sails do not shiver.