
BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL AMXFLIGHT AFX-105
27
PARTS REPLACEMENT
ROTOR BLADES
Remove the screw on the rotor blade holder using an Hex wrench.
When mounting, make sure that you do not overtighten the screw.
The rotor blades must be able to swing freely.
MAIN MOTOR
First disconnect the plug from the electronics.
Carefully pull out the motor by turning it to the
left and right.
MAIN GEAR
First unscrew the screw and pull out the gear downwards. Pay
attention to the direction when installing the new gear. The flat spot
in the main gear must fit the corresponding spot on the shaft.
When removing and replacing the tail rotor, please note the direction.
Place the new rotor on the motor shaft and press it gently onto it. Make
sure that it can rotate easily.