
BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL AMXFLIGHT AFX-105
21
CHARGING BATTERY
METHOD 1:
Charging battery by the USB port on a computer.
1.
Connect the USB charger with the USB port.
2.
Connect the battery with USB charger: blue light ladder
flashes while charging. When the loading process is
finished, all LEDs light up.
METHOD 2:
Charging battery by power supply adapter.
1.
Connect the USB charger with the power supply adapter.
2.
Connect the battery with USB charger: blue light ladder
flashes while charging. When the loading process is
finished, all LEDs light up.
METHOD 3:
Charging battery by power bank.
1.
Connect the USB charger with the USB port.
2.
Connect the battery with USB charger: blue light ladder
flashes while charging. When the loading process is
finished, all LEDs light up.
BATTERY STATUS
The battery has a function to check the charge level. To do this, the button on the
housing must be briefly pressed once. The four LEDs indicate the status of the battery.
All four LEDs light up: The battery is fully charged.
Three LEDs are lit: The battery has 75% remaining capacity.
Two LEDs are lit: the battery has 50% remaining capacity.
One LED lights up: the battery has 25% remaining capacity.
NOTE:
If the helicopter is not to be used for an extended period, we recommend charging the battery to 50%.
Batteries should be removed from the remote control in this case to prevent leakage.
Die blauen LEDs blinken
während des Ladens.
Button