Ametek TM2000 Pro, Руководство пользователя, Страница: 78 / 148

5-6 | TM2000 Oxygen Analyzer
remote Calibrate
1. Enter the calibration gas value to match the zero calibration gas cylinder you
are using to calibrate your system ( Cal Gas Values ). This value is referred to
in this section as the set point value .
2. From the Calibrate Key menu, select Initiate Cal .
3. Select Continue Cal to continue or Abort Cal to cancel the calibration and
avoid recovery time. Pressing Cancel acts the same as Abort Cal .
4. Select Remote Calibration .
You are prompted to calibrate the zero gas:
5. Once the zero gas reading on the left of the display stabilizes, press
Enter
.
The remaining recovery time displays:
After the recovery period, the system returns to process readings.
Manual Calibrate
1. Enter the calibration gas value to match the zero calibration gas you intend to
use to calibrate your system ( Cal Gas Values ).
2. From the Calibrate Key menu, select Initiate Cal .
3. Select Continue Cal to continue or Abort Cal to cancel the calibration and
Are the Cal Gas values entered?
O2 xx.x Set xx.x
Press ENTER to Zero
Recovery xx:xx
System Calibrating
Are the Cal Gas values entered?
The reading on the far
right of the first display
line shows the set point
value you entered for the
O
2
zero gas using the Cal
Gas Values menu option.
This O
2
zero gas set point
value should match the
cal gas cylinder for the
O
2
zero gas connected to
your RCU.