Ametek Thermox WDG Insitu, Руководство пользователя

Страница: 94 / 166

5-14 | Thermox Series 2000 WDG Insitu Analyzer
Set Cal Timers
Set Auto Timers
Set Time & Date
Aut Cal On/Off
Cal Gas Duration
Recovery Duration
SET CAL TIMERS KEY
Figure 5-2. Set Cal Timers menu options.
Sub-Menu Function
Set Auto Timers Set auto timer for desired auto calibration/verification
cycle times.
Set Time and Date Set the current time and date.
Auto Cal On/Off
Enable or disable the auto calibration cycle.
Cal Gas Duration Define how long cal gases should flow through the sen -
sor during automatic calibrations or verifications.
Recovery Duration
Define a recovery duration during which time the sensor
switches from measuring calibration gas readings to
measuring process readings without affecting the ana-
log output or triggering of alarms.
Set Cal Timers - Set Auto Timers
Set the frequencies for automatic calibrations or verifications, including
the time when the first calibration or verification should begin. You have
the option of setting the cycle in either hours or days.
If you schedule a verification and calibration at the same time, the
verification will be performed first.
NOTE
