Ametek Sorensen XFR 1200 Watt Series, Руководство по эксплуатации

Страница: 97 / 106

Electrical Specifications
TM-F1OP-C1XN-01 A-3
Temperature Coefficient:
i
Voltage (0.02% of Vmax/°C)
Current (0.03% of Imax/°C)
For Resistive Programming:
Voltage (0.06% of Vmax/°C)
Current (0.06% of Imax/°C)
1.2 mV
60 mA
3.6 mV
120 mA
1.5 mV
42 mA
4.5 mV
84 mA
2.4 mV
30 mA
7.2 mV
60 mA
4 mV
18 mA
12 mV
36 mA
7 mV
10.5 mA
21 mV
21 mA
OVP Adjustment Range:
(5% to 110% of Vmax) 0.3-6.6 V 0.375-8.25 V 0.6-13.2 V 1-22 V 1.75-38.5 V
Efficiency:
j
0.75 0.78 0.81 0.81 0.83
a. Minimum output voltage is <0.15% of rated voltage at zero output setting.
b. Minimum output current is <0.5% of model-rated current at zero output setting, when measured on minimum 10% of
full power load.
c. For rack mounted 6 V models, derate output current by 1.5 A per °C for operating temperatures between 30 °C and
50 °C. See
“Environmental Specification” on page A–10 .
d. For input voltage variation over the AC input voltage range, with constant rated load.
e. For 0-100% load variation, with constant nominal line voltage.
f. Current mode noise is measured from 10% to 100% of rated output voltage, full current. For 6 V models, current noise
is measured from 2 V to 6 V, full current.
g. Maximum drift over 30 minutes with constant line, load, and temperature, after power on.
h. Maximum drift over 8 hours with constant line, load, and temperature, after 30-minute warm-up.
i. Change in output per
°
C change in ambient temperature, with constant line and load.
j. Typical efficiency at 100 Vac input voltage and full output power.
Table A-1 Electrical Specifications for 6 V to 35 V Models
TM-F1OP-C1XN-01.book Page 3 Thursday, October 25, 2007 9:04 PM