Ametek Sorensen XFR 1200 Watt Series, Руководство по эксплуатации

Страница: 70 / 106

Local Operation
3-12 TM-F1OP-C1XN-01
Configuring Multiple Supplies for Series Operation
Use series operation to obtain a single higher voltage output using two or
more supplies. Connect the negative (–) output terminal of one supply to
the positive (+) output terminal of the next supply. See
Figure 3-2 . The
total voltage available is the sum of the maximum voltages of each supply
(add voltmeter readings, to a maximum of 600 V). The maximum
allowable current for a series string of power supplies is the output current
of a single supply in the string.
CAUTION
Do not use remote sensing during series operation.
The maximum allowable sum of the output voltages is 600 Vdc.
Figure 3-2 Series Operation of Multiple Supplies
(Local sense lines shown are default J10 connections.)
TM-F1OP-C1XN-01.book Page 12 Thursday, October 25, 2007 9:04 PM