Ametek PK II Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 28

Ametek PK II Скачать руководство пользователя страница 4

- 4 -

1.0 INTRODUCTION AND PRODUCT OVERVIEW

The AMETEK

®

PK II Pneumatic Deadweight Tester is a primary standard that produces a

pressure by applying force (weight set) over area (the ceramic ball and nozzle). The PK II
tester is NIST traceable and accurate to +0.015% of indicated reading using stainless steel
weights cal brated to international standard gravity at 980.665cm/sec

2

. The unit is intended

for low pressure applications up to 30 PSIG (2 bar). The PK II tester may also be cal brated
to the user’s local gravity or to inches or centimeters of H

2

O at 20°C per ISA recommended

practices, or to reference water columns at 60°F per AGA standard practices.

The PK II tester is self-regulating with accuracy independent of the operator. The tester
utilizes a frictionless ceramic ball which floats on a layer of air within a stainless steel
cylinder.

The PK II tester features a sturdy cast-metal base with integral quick-leveling system for
field or laboratory use. The case also contains a tripod fixture allowing the unit to be tripod
mounted in the field.

1.1 PRODUCT FEATURES

The key features of the

PK II Pneumatic Deadweight Tester are:

G

Accuracy up to +0.015% of indicated reading

G

Floating ball operation eliminates need to rotate weights during testing

G

Self regulating input air flow maintains ball and weights in a float position and compen-
sates for variations in air supply pressure

G

Rugged ceramic measuring ball withstands harsh environments and field use

G

Monocontaminating fluid eliminates the need to clean instruments after cal bration or
before use

G

Close cover operation eliminates wind effects in field cal brations

G

Multi-position ball valves for both the inlet and outlet connections ensures trouble-free
operation

G

Certificate of Accuracy and Traceability available with area, mass and intrinsic correc-
tion factors

G

Rugged aluminum housing offers long life. Top (Front) housing is revers ble.

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

TestEquipmentDepot.com

«
...
2
3
4
5
6
...
»

Содержание PK II





























Отзывы:

Нет отзывов