Ametek ORTEC radEAGLET, Руководство пользователя

Страница: 21 / 140

radEAGLET User Manual Using the radEAGLET

The radEAGLET logs data. You might want to stop logging, e.g., before you
move to survey a different object or to save energy.
利
Data logging is off.
Spectrum Acquisition
This symbol shows whether the radEAGLET currently acquires and records
spectral data.

The radEAGLET is currently recording a spectrum.
You might want to stop spectrum acquisition, e.g., before you move to sur-
vey a different object or to save energy.

Spectrum acquisition is off.
Center: Variable Main Display
The contents of this area change to the current mode of operation of your radEAGLET .
This may be status information after powering up the instrument (Fig. 17 , p. 28 ),
menus to choose from (Fig. 30 , p. 44 ), alarms (Fig. 28 , p. 40 ), or measurement
results (Fig. 22 , p. 34 ).
Bottom: Keyboard Legend
The labels in this area name the function currently associated with each of the
radEAGLET keys (Fig. 5 , p. 19 , Fig. 6 , p. 22 ).
2.1.1 Status LEDs
Alarm and battery status LEDs are built into the keyboard of the radEAGLET (Fig. 1 , p. 14 ,
Fig. 6 , p. 22 ).
G Gamma warnings and alarms
N Neutron warnings and alarms
This item is available for radEAGLET models with a neutron detector (see E.1 , p. 133 ).
Battery charging, blinks when fully charged (“trickle charge”).
Battery failure: temperature not within the allowed range or battery completely dis-
charged.
2.2 Using the radEAGLET Keys
You control the radEAGLET with the three keys (Fig. 1 , p. 14 ) under your thumb while holding
the instrument by its handle.
Pressing a key triggers a feedback tone which you can switch off (see 5.5 , p. 53 ).
On the instrument, the keys look like this: I . In oral communication they are often
called “left” “center”, and “right”.
© innoRIID GmbH • 2018-10-24 Software 3.2.0 • Document 3.2.2o 21/140