Ametek ORTEC MOBIUS-B, Руководство пользователя, Страница: 2 / 28

PROPERTY OF AMETEK, INC. – ORTEC ®
ORTEC
® MÖBIUS™ Recycler HPGe Detector Cooling System
805709F / 1115
ii
Advanced Measurement Technology, Inc.
a/k/a/ ORTEC
®
, a subsidiary of AMETEK
®
, Inc.
WARRANTY
ORTEC* warrants that the items will be delivered free from defects in material or workmanship. ORTEC makes no other
warranties, express or implied, and specifically NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
ORTEC’s exclusive liability is limited to repairing or replacing at ORTEC’s option, items found by ORTEC to be defective in
workmanship or materials within one year from the date of delivery. ORTEC’s liability on any claim of any kind, including
negligence, loss, or damages arising out of, connected with, or from the performance or breach thereof, or from the
manufacture, sale, delivery, resale, repair, or use of any item or services covered by this agreement or purchase order, shall
in no case exceed the price allocable to the item or service furnished or any part thereof that gives rise to the claim. In the
event ORTEC fails to manufacture or deliver items called for in this agreement or purchase order, ORTEC’s exclusive liability
and buyer’s exclusive remedy shall be release of the buyer from the obligation to pay the purchase price. In no event shall
ORTEC be liable for special or consequential damages.
Quality Control
Before being approved for shipment, each ORTEC instrument must pass a stringent set of quality control tests designed to
expose any flaws in materials or workmanship. Permanent records of these tests are maintained for use in warranty repair
and as a source of statistical information for design improvements.
Repair Service
If it becomes necessary to return this instrument for repair, it is essential that Customer Services be contacted in advance of
its return so that a Return Authorization Number can be assigned to the unit. Also, ORTEC must be informed, either in
writing, by telephone [(865) 482-4411] or by facsimile transmission [(865) 483-2133], of the nature of the fault of the
instrument being returned and of the model, serial, and revision (“Rev” on rear panel) numbers. Failure to do so may cause
unnecessary delays in getting the unit repaired. The ORTEC standard procedure requires that instruments returned for repair
pass the same quality control tests that are used for new-production instruments. Instruments that are returned should be
packed so that they will withstand normal transit handling and must be shipped PREPAID via Air Parcel Post or United Parcel
Service to the designated ORTEC repair center. The address label and the package should include the Return Authorization
Number assigned. Instruments being returned that are damaged in transit due to inadequate packing will be repaired at the
sender's expense, and it will be the sender's responsibility to make claim with the shipper. Instruments not in warranty
should follow the same procedure and ORTEC will provide a quotation.
Damage in Transit
Shipments should be examined immediately upon receipt for evidence of external or concealed damage. The carrier making
delivery should be notified immediately of any such damage, since the carrier is normally liable for damage in shipment.
Packing materials, waybills, and other such documentation should be preserved in order to establish claims. After such
notification to the carrier, please notify ORTEC of the circumstances so that assistance can be provided in making damage
claims and in providing replacement equipment, if necessary.
Copyright © 2014, Advanced Measurement Technology, Inc. All rights reserved.
*ORTEC
®
is a registered trademark of Advanced Measurement Technology, Inc. All other trademarks used herein are the property of their
respective owners.
NOTICE OF PROPRIETARY PROPERTY — This document and the information contained in it are the proprietary property of AMETEK Inc.,
ORTEC Business Unit. It may not be copied or used in any manner nor may any of the information in or upon it be used for any purpose
without the express written consent of an authorized agent of AMETEK Inc., ORTEC Business Unit.