Ametek Level Mate II, Инструкции по установке, эксплуатации, техническому обслуживанию, обслуживанию и запасным частям

Страница: 11 / 14

18
I II III IV V VI VII VIII IX
LEVEL
MATE II TRANSMITTER
INPUT TYPE
4-20 mA
INCHES OF
WATER
COUNT
BY
FEET OF
WATER
COUNT
BY
METERS
OF WATER
COUNT
BY
LMT100 575SB0006RLS(50) rdLO 00.0 1 0.00 1 .000 5
rdHI 166.4 1 13.86 1 4.226 5
LMT200 575SB0015RLS(75) rdLO 00.0 2 0.00 2 0.00 1
rdHI 415.9 2 34.66 2 10.56 1
LMT300 575SB0030RLS(100) rdLO 00.0 5 0.00 5 0.00 2
rdHI 831.9 5 69.32 5 21.13 2
LMT400 575SB0060RLS(200) rdLO 00.0 1 0.00 5
rdHI 138.6 1 42.26 5
LMT500 575SB0100RLS(300) rdLO 00.0 2 0.00 5
rdHI 231.1 2 70.43 5
LMT600 575SB0150RLS(425) rdLO 00.0 2 00.0 1
rdHI 346.6 2 105.6 1
LMT700 575SB0200RLS(550) rdLO 00.0 5 00.0 1
rdHI 462.2 5 140.9 1
LMT800 575SB0300RLS(750) rdLO 00.0 5 00.0 2
rdHI 693.2 5 211.3 2
I Level Mate II model number.
II Transmitter used. Cable length is in parentheses ( ).
III The input type to be selected is 4-20 mA.
IV Decimal point location and display reading entered for inches of water level measurements.
VI Decimal point location and display reading entered for feet of water level measurements.
VIII Decimal point location and display reading entered for meters of water level measurements.
V, VII & IX The display resolution (count by) that is recommended.
TABLE VI - LEVEL MATE II INPUT TYPE & DISPLAY SCALING
11
WARNING: Do not connect any wires while AC Power is applied.
FIGURE 1 METER REAR CONNECTIONS
RS-232