130068 00
2019-03-26
15
1. Use the (Up) and (Down) Arrow keys to select the Memory-setup you want to
modify, and press (Save). The new configuration is now saved.
2. You can change the name of the highlighted saved setup by pressing (Enter), and
then using the (Up) and (Down) Arrow keys to change the characters.
The name is limited to seven (7) characters.
3. Press to save the new name.
•
Recall menu
To recall your memory setups select the Recall function.
1. Use the (Up) and (Down) Arrow keys to to scroll in the setup-list.
2. Select the requested setup, and press (Enter).
The name of the setup will appear in the upper-left corner of the display.
If selecting the Factory default function the active setup will be reset and change to
the initial setting.
4.3
Starting the calibrator
Switch on the calibrator using the power control switch.
A start up screen is displayed and then replaced with the main menu screen:
The functions in the horizontal menu bar are available using the Functions soft keys F1–
F4. For Operating principle – See section 4.1.
4.4
Stability setting
When internal reference is selected the calibrator uses a set of minimum internal
stability criteria that shall be met before stability is indicated.
The stability time can be adjusted from the minimum internal stability time (typical 5 min)
up to 99 min.
F3
F3
