8
2017-08-11
125614
04
•
Select the proper function and range for your
measurement.
•
Always position the multi-scanner to enable easy and
quick disconnection of the power source (mains
adaptor).
•
Do not use the multi-scanner if it operates abnormally.
Protection may be impaired. When in doubt, get the
multi-scanner serviced.
•
Disconnect test leads before changing to another
measure or source function.
•
During set-up, make sure that there is correlation
between the software set-up, and the actual distribution
of the sensors connected to the multi-scanner. The
software cannot detect misplacements of sensors.
•
When servicing the multi-scanner, only use specified
replacement parts. There are no user serviceable parts
inside the multi-scanner.
Caution…
To avoid possible damage to the multi-scanner or to
the equipment under test:
•
Disconnect the power and discharge all high-voltage
capacitors before testing resistance or continuity.
•
Use the proper connectors, function and range for your
measurement.
•
When using the switch test function, make sure that no
other equipment, such as heavy loads or sources, is
connected in the test loop.
Note…
The product liability only applies if the instrument is
subject to a manufacturing defect. This liability becomes
void if the user fails to follow the maintenance instructions
described in this manual or uses unauthorized spare parts.
