User Manual
© 2022 AMETEK Electronic Systems Protection / Technical Support: 1-800-645-9721 / espsurgex.com
8
b. Clearing Memory:
The Next Gen PCS Filter is able to timestamp the 60 most recent power quality
events (information stored in microcontroller non-volatile memory). The
microcontroller memory contents can be cleared at any time by following one of
these two methods:
i.
RST
Button:
There is a recessed push button located on the far right of the front
endplate (the end plate that contains the RJ45 and RJ11 and modular
jacks).
Follow these steps to clear the device memory:
1.
Unplug the input cord of the Next Gen PCS Filter from the branch
circuit outlet.
2.
Using a paperclip or small screwdriver, press and hold the
RST
button.
3.
Plug the input cord of the Next Gen PCS Filter into a properly
grounded and compatible branch circuit outlet, while continuing to
hold the
RST
button.
4.
Wait approximately 3-5 seconds; the LCD Event Monitor will now
display
“cLr”; release the
RST
button and the device
microcontroller memory will now be cleared.
ii. Diagnostic Software:
The device microcontroller memory may alternately be cleared from within
the Diagnostic Software. See Section:
“Using the Software” for details.
