Support
15
XP2i Operation Manual
SOFTWARE
LabVIEW™ Drivers and Programming Instructions
Control and communicate with XP2is using National Instrument’s
, or our
. Integrate XP2is into your test environment!
ConfigXP Configuration Software
Use
to disable unwanted pressure units, set default pressure units, change water density, adjust calibration, and more via the RS-232 interface.
REPLACEMENT PARTS
The only user-replaceable parts are the batteries.
ACCESSORIES
P/N 2984
AC adapter kit
Permits operation of an XP2i from an AC supply of 90 - 264 VAC and 47 - 63 Hz . Includes interchangeable international plugs (for USA, Europe, U .K ., and Australia) .
Adapter will not charge batteries, but in the event of AC power loss, XP2is will automatically revert to battery operation .
P/N 3313
USB-RS232 Adapter
USB B receptacle to RS232 DB9M .
P/N 2400
RS232 Cable
DB-9 male to DB-9 female straight pass-through cable .
