Ametek Land System 4 Landmark Technic Processor Скачать руководство пользователя страница 7

Страница: 7 / 34

Page 1

User Guide

Landmark Technic

Signal Processor

1 Introduction

1.1 About this guide

This guide gives the information necessary for you to operate a Landmark

Technic Signal Processor. Information regarding installation is contained

within the Installation Guide. More detailed information regarding servicing,

repair and calibration of the processor is contained in the Service Manual.

1.2 About the Landmark Technic Processor

The Landmark Technic Signal Processor provides an accurate signal

processing unit for a single LAND System 4 thermometer. Features include:
•

DIN rail mounting case

•

Averager, Peak Picker and Track and Hold, for signal processing

•

Remote input for Track and Hold, Control, Peak Picker Reset

• Emissivity/Non-greyness
•

Alarm output

•

Retransmission of the thermometer signal output.

Setting up of the processor is performed using a PC and configuration

software (see Section 4).

1.3 Unpacking the processor

The package containing the processor will contain the following items:
•

Landmark Technic Signal Processor

•

Installation Guide

•

CD containing System 4 User Documentation

•

Configuration software on CD and cable

1.4 Nomenclature

The processor is identified as the Landmark Technic (LM Technic) signal

processor.

Содержание System 4 Landmark Technic Processor


































Результаты поиска

Содержание System 4 Landmark Technic Processor

Отзывы:

Бренды по названию

Популярные бренды

Ametek Land System 4 Landmark Technic Processor, Руководство пользователя

Результаты поиска

Содержание System 4 Landmark Technic Processor

Отзывы:

Бренды по названию

Популярные бренды