Page 9
Millwatch/Silowatch
Single Stream
User Guide
7.1 Recommendations for Installing the Instrument Air Supply and
Calibration Gas
*A 30 psi pressure regulator is supplied in the spares kit with the monitor and
must be fitted by the user. All other pressure regulators and pipework must be
supplied by the customer.
7 Recommended Installation for Probe
Position the analyser and probe below the blowback unit to allow any condensate
to drain.
1 Cooling air supply
2* Calibration air supply
3 Compressed air supply
4 Mill/Silo Fire Detector
5 Calibration gas (CO), 2
stage non-relieving pressure
regulator
Millwatch / Silowatch (CO single stream, including high-CO) only
