Page 8
For technical questions, please call 1-888-866-5797.
Item 64019
S
AFETY
Op
ERA
TION
M
AINTENANCE
S
ETU
p
Operating Instructions
Read the ENTIRE IMpORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Electrical shock can cause death or injury! NEVER TOUCH
exposed conductors of electricity
.
General Operating Instructions
REL
1. Press the
REL
button once to
enter relative measurement mode
and store a reference value.
2. Take additional measurements to
display difference between measured
value and reference value.
3. Press
REL
button a second time to
return to normal measuring mode.
Note:
Relative measurement mode can
only be used in manual range mode.
Note:
Relative measurement mode
cannot be used in
Hz%
mode.
Manual Range
The Meter’s default range is
AUTO
in voltage, current, resistance, and
capacitance modes. To select manual range, press
RANGE
. Each press of the
button increases the range. Hold the
RANGE
button to return to auto-range.
Maximum and Minimum Value Measurements
1. Press the
MAX MIN
button one
time to measure the maximum
value at any range.
2. Press the
MAX MIN
button
two times to measure the
minimum value at any range.
3. Read measured minimum or maximum
value at the top right of the Display.
4. Hold the
MAX MIN
button
for one or more seconds to
return to normal mode.
Note:
The Meter is automatically set to
manual range mode when measuring
minimum or maximum value.
Note:
Minimum and maximum value mode
cannot be used while in
Hz%
mode.
