Page 8
For technical questions, please call 1-888-866-5797.
Item 64020
S
AFETY
Op
ERA
TION
M
AINTENANCE
S
ETU
p
Operating Instructions
Read the ENTIRE IMpORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Electrical shock can cause death or injury! NEVER TOUCH
exposed conductors of electricity
.
General Operation
Data Hold Button
Keep current reading on display.
1. Press
HOLD
button to keep current
reading.
HOLD
will appear on Display.
2. Press
HOLD
button to release hold.
Hz% Button
Switch between frequency and duty cycle measurements.
See page 12.
REL Button
Show difference between two
readings in AC Current and
AC/DC Voltage.
See page 9.
Zero out Test Lead resistance to
obtain accurate low resistance
reading.
See page 11.
Zero out initial capacitance
reading.
See page 11.
Backlight
1. Press and hold
HOLD
button
until Backlight turns on.
Note:
HOLD
will appear on Display.
2. Press
HOLD
button again
to release hold.
3. When finished, press and hold
HOLD
button until Backlight turns off.
Note:
HOLD
will appear on Display.
4. Press
HOLD
button again
to release hold.
Note:
Frequent use of backlight
will shorten battery life.
Worklight
1. Press Worklight button to
turn on Worklight.
2. Press Worklight button again
to turn off Worklight.
Auto power Off
Meter will automatically turn off after 30 minutes of non-use. To
conserve battery power, turn Meter off after use.
