Page 11
For technical questions, please call 1-888-866-5797.
Item 64020
S
AFETY
Op
ERA
TION
M
AINTENANCE
S
ETU
p
Continuity Measurement
Test continuity between two
points of a circuit.
WARNING!
To prevent electric
shock, disconnect all power to
circuit and discharge all high-voltage
capacitors before measuring.
1. Plug black Test Lead into
black
COM
Jack.
Plug red Test Lead into red Input Jack.
2. Turn Rotary Switch to
Ω
position.
3. Press
SELECT
button
until is displayed.
4. Short Test Leads together, meter
should beep continuously.
5. Connect Test Leads to two points of
circuit. If resistance value is less than
30Ω, Meter will beep continuously.
6. When testing is complete, turn
Rotary Switch to
OFF
, remove
Test Leads and store with Meter.
Capacitance Measurement
Measure capacitance up to 100μF.
WARNING!
To prevent electric
shock, disconnect all power to
circuit and discharge all high-voltage
capacitors before measuring.
Note:
It may take up to 30 seconds
for reading to stabilize.
1. Plug black Test Lead into
black
COM
Jack.
Plug red Test Lead into red Input Jack.
2. Turn Rotary Switch to
Ω
position.
3. Press
SELECT
button
until
n F
appears.
4. Press
REL
button to zero out
reading as necessary.
5. Carefully touch capacitor
leads with tips of probes.
6. Read measurement.
Note:
If capacitor is short
circuited or capacitance is too
high, display will read
OL.
7. When testing is complete, turn
Rotary Switch to
OFF
, remove
and store capacitor and Meter.
