11
GETTING STARTED
Setting Up Your Ameritech AM 1930
Choose an area near an electrical
outlet and a telephone wall jack.
AC Power Adapter
Plug the AC power adapter into an
electrical outlet and the DC connecter
to the back of the base unit.
CAUTION:
Use only CLASS 2 9V DC POWER
SUPPLY included with your phone.
Handset Ringer
The handset ringer is programmed ON
as the factory default setting. Refer to
PROGRAMMING THE RINGER (p.26)
for more information.
Setting the Tone/Pulse Switch
The TONE/PULSE switch is located on
the bottom of the base unit and is
factory set to TONE. If you have touch
tone service, do not change the switch
setting. If you have rotary (Pulse)
service, set the switch to PULSE.
Charge the handset battery pack
before use. The battery pack recharges
automatically whenever the handset is
in the base unit. The batteries must
be charged for 16 hours before using
your phone for the first time.
Connect Telephone Line Cord
Plug one end of the telephone cord into
a wall jack and the other end into the
back of the Base Unit.
TELEPHONE
WALL JACK
AC
OUTLET
9V DC TEL LINE
PULSE
TONE
ON
OFF
RINGER
TONE PULSE
SWITCH
BASE RINGER
ON/OFF
SWITCH
POWER
HANDSET
IN USE
1
4
7
GHI
MEM
HOLD
INTERC
MEMORY
CHARGE THE
HANDSET
BATTERY PACK
FOR 16 HOURS
BEFORE USING
AM 1930
9/5/99, 12:13 AM
11
