2
Table of Contents
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warranty
One Year Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Warranty Claim Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Pre-Installation
Tools/Materials Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Hardware Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Planning Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Maintenance
Replacing Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Replacing Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Care and Cleaning
Range Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Specifications
Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
External Range Hood Diagram . . . . . . . . . . . . . . . . . . . . . . . 17
Service Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Safety Information
READ AND SAVE THESE INSTRUCTIONS
Warning - To reduce the risk of fire, electric shock, or injury to
persons, observe the following:
1 . Use this unit only in the manner intended by the manufacturer . If
you have any questions, contact the manufacturer .
2 . Before servicing or cleaning unit, switch power off at service
panel and lock service disconnecting means to prevent
power from being switched on accidentally . When the service
disconnecting means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel .
3 . Installation work and electrical wiring must be done by qualified
person(s) in accordance with all applicable codes and standards,
including fire-rated construction.
4 . Sufficient air is needed for proper combustion and exhausting
of gases through the flue (chimney) of fuel burning equipment
to prevent back drafting . Follow the heating equipment
manufacturer’s guideline and safety standards such as those
published by the National Fire Protection Association (NFPA),
and the American Society for Heating, Refrigeration and Air
Conditioning Engineers (ASHRAE), and the local code authorities .
5 . When cutting or drilling into a wall or ceiling, do not damage
electrical wiring and other hidden utilities .
6 . Ducted fans must always be vented to the outdoors .
DANGER:
Turn off the power circuit breaker or the power
switch on the junction box before installing or servicing
this unit . Touching circuitry inside the range hood while it is
energized will result in death or serious injury .
DANGER:
All electrical wiring must be properly installed,
insulated, and grounded . Improper insulation and grounding
will result in deadly electrical shock .
DANGER:
If installing this unit over a gas range, turn off
the gas at the source before installing or servicing this unit .
WARNING:
Attempting to install or service this unit
when you do not have the necessary technical or electrical
background could result in personal injury .
WARNING:
The unit has sharp edges . Always wear safety
gloves during installation, cleaning, or servicing .
WARNING:
Always leave safety grills and filters in place.
Without these components, operating fans could catch on to
hair, fingers, or loose clothing.
WARNING:
Stay clear of the rotating fan when the motor
is running .
WARNING:
Keep this appliance clean and free of grease
and residue build-up at all times to prevent fires.
CAUTION:
This device is for general ventilating use only .
Do not use to exhaust hazardous or explosive materials and
vapors .
