14
Care and Cleaning
RANGE HOOD
WARNING:
Failure to maintain basic standards of care and cleaning of the range hood will increase the risk of fire.
The range hood should be cleaned (regularly internally and externally) to preserve its appearance and performance .
Do:
Do Not:
- Always clean in the direction of the grain (original
polish lines) .
- Clean the range hood periodically with hot, soapy
water and a clean cotton cloth .
- Always rinse well with clean water two or three
times after cleaning . Wipe completely dry with a
soft non-abrasive cloth.
- After cleaning, you may polish with a non-abrasive
stainless steel polish or cleaner . Always rub lightly
and with the grain .
- Ensure that the venting system is free of debris, if
you have one .
- Do not use corrosive or abrasive detergents, steel
wool, or scouring pads . These will scratch and
damage the stainless steel surface .
- Do not use any products containing chloride,
fluoride, iodide, or bromide on this product, as they
will deteriorate the surface rapidly .
- Do not allow cleaning compounds, salt solutions,
disinfectants, or bleaches to remain in contact with
the product for extended periods of time .
- Do not allow any deposits to remain for long
periods of time on the range hood . Rinse with
water immediately and wipe dry with a clean cloth .
- Do not let plaster dust or any other construction
residue enter the hood . During construction or
renovation, cover the hood .
- Combustible products used for cleaning such as
acetone, alcohol, ether, or benzol are highly explosive
and should never be used close to a range or stove .
FILTERS
The filter fitted by the factory is intended to filter out residue and grease from cooking. You do not need to replace them on a regular basis,
but you should keep them clean .
Do:
Do Not:
- Clean the filters once a month using non-abrasive
detergents, either by hand or in the dishwasher .
When using a dishwasher, set the dishwasher to
a low temperature and a short cycle setting . The
filter may become discoloured in a dishwasher, but
this does not affect its performance .
- Dry the filters before re-installing them in the range
hood .
- Do not allow oil to accumulate over more than 80%
of the filter surface. Oil accumulations may drip oil
onto the range .
