
CLEARING THE CONDENSATION DRAIN TUBES
There are two drain hoses that are attached to the back of the heater. If both of these get clogged, water will spill
down the outside of the unit. The primary drain is intended to carry all condensate away. If it is clogged or if the hose is
kinked, the condensate will exit from the secondary drain tube onto the floor. This is intended as a notification to the
user that the primary drain is clogged. Remove the drain hose and clear any debris. Reattach.
Periodically inspect the drain lines and clear any debris that may have been collected in the lines.
See Installation Instructions for more information.
3
"
Secondary drain
tube (overflow)
Main drain tube
Direct the main
drain tube into a drain
12
HEAT PUMP WATER HEATER
Содержание HPWH50G-AS
Страница 25: ...25 Notes ...