J1
© 2008 AS America Inc.
HERITAGE™
PEDESTAL SINK
VITREOUS CHINA
HERITAGE™ PEDESTAL SINK
• Classic design with large, spacious deck space
• Made from vitreous china
• Rear overflow
•
Design-matched to Heritage toilets
• Supplied with mounting kit
❏
0191.134 Faucet holes on 8" (203mm) centers
Nominal Dimensions:
762 x 514 x 864mm
(30" x 20-1/4" x 34")
Separate Components:
❏
0191.643 Pedestal top-8" (203mm) centers
❏
734700-400 Pedestal only
Bowl sizes:
454mm (17-7/8") wide
295mm (11-5/8") front to back
165mm (6-1/2") deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures
To Be Specified:
❏
Color:
❏
White
❏
Bone
❏
Linen
❏
Faucet*:
❏
Faucet Finish:
❏
Supplies:
❏
1-1/4" Trap:
* See faucet section for additional models available
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
▼
PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■
SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
DRAIN
CHASE
OPEN
TO
FLOOR
*
*
864mm
(34)
203mm
(8)
102mm
(4)
102mm
(4)
511mm
(20-1/8)
572mm
(22-1/2)
178mm
(7)
514mm
(20-1/4)
762mm
(30)
203mm
(8)
73mm
(2-7/8)
191mm
(7-1/2)
(3) 35mm (1-3/8)
DIA. HOLES
SLOTS FOR
ANCHOR SCREWS
SUPPLIES AS
REQUIRED
1-1/4 O.D.
WASTE OUTLET
1-1/4 O.D.
TAILPIECE
FINISHED
WALL
FINISHED
FLOOR
743mm
(29-1/4)
(2) 11mm (7/16)
ANCHOR BOLT HOLES
n
248mm
(9-3/4)
Revised 2/08
