4
M 9 6 8 7 2 1 R E V. 1. 4
3
INSTALL HANDLES
Push ADAPTER
(2)
into HANDLE BASE
(3)
in a way that the male square on the ADAPTER
(2)
fits in the female 8 point star of the HANDLE
(4)
.
Turn HANDLE STEM
(1)
to the off position. Push HANDLE BASE
(3)
, ADAPTER
(2)
and
HANDLE
(4)
onto VALVE STEM
(1)
.
Tighten HANDLE SCREW
(5)
.
Push INDEX CAP
(6)
in top of HANDLE
(4)
.
Push ADAPTER
(2)
into LEVER HANDLE BASE
(7)
in a way that the male square on the
ADAPTER
(2)
fits in the female star of the HANDLE BASE
(7)
.
Turn HANDLE STEM
(1)
to the off position. Push LEVER HANDLE BASE
(7)
and
ADAPTER
(2)
onto VALVE STEM
(1)
.
Tighten HANDLE SCREW
(6)
.
Check alignment, if not satisfactory aligned;
Push out ADAPTER
(2)
carefully.
Turn ADAPTER
(2)
either 45˚ or 90˚ so that male square on ADAPTER
(2)
catches different female square in LEVER HANDLE BASE
(7)
.
Assemble and tighten HANDLE SCREW
(6)
. Push INDEX CAP
(8)
in top of LEVER HANDLE BASE
(7)
.
CROSS HANDLE
LEVER HANDLE
1
3
4
FERRULE
COUPLING NUT
MAKE WATER SUPPLY CONNECTIONS
Connect water supply to FAUCET
(1)
with 1/2" IPS FLEXIBLE SUPPLIES
(3)
or 3/8"O.D. BULL-NOSE RISERS
(4)
. Use adjustable wrench to
tighten connections. Do not over tighten. Be careful not to kink copper
supply when bending. Use tubing cutter to cut to proper length.
NOTE: FLEXIBLE SUPPLIES OR BULL-NOSE RISERS MUST BE PURCHASED SEPARATELY.
CROSS HANDLES
LEVER HANDLES
2
2
4
4
5
5
6
6
8
6
1
3
7
